There are no mechanical parts inside the Vortex Flowmeters. It can be used easily even in fluids containing partial particles. The absence of mechanical parts inside is a long-lasting effect. Instant and total flow information can be observed with the indicator on these models. Depending on the request, this information can be transferred via analog output. Common uses to measure Steam, Compressed Air, Boiler Feed Water etc.
| Measurement Range |
Liquid: 0.25 m / s to 9.5 m / s Gas: 4 m / s to 78 m / s Steam: 3 m / s to 78 m / s |
|---|---|
| Measurement Field | Liquid, gas, steam |
| Body Material | Aluminum Alloy |
| Temperature Range | Display Temperature: -40 ° C to + 80 ° C High Temperature + 280 ° C Maximum Temperature + 320 ° C |
| Average Pressure | 1.0MPa, 1.6MPa, 2.5MPa Standard ... Optional 3.2MPa |
| Actual Error Rate | Full Load Type: ± 0.5%, ± 1.0%, ± 1.5% Immersion Type: ± 2.5% |
| Number of Reynolds | Re>4000 |
| Friction Coefficient | Full Load Type: Cd <2.4, Immersion Type: Loss of Loss Can Be Neglected |
| Explosion Resistance Grade | Internal Safety Type: ia II T2 ~ T5, Explosion Protection Type: d II BT4 |
| Ambient temperature | Normal Ambient -40 ° C to + 55 ° C; Explosion-Proof Environment -20 ° C to + 55 ° C |
| Output | 1 ~2600Hz Frequency Output, Low Level,5V or 2 Wire 4-20mA Analog Output |
